Keyword:Small machining center, Desktop machining center,Small five axis machining center, Desktop teaching machining center, Pilot five axis linkage machining center

With the upgrading of the manufacturing industry, there is a severe shortage of "technically composite" talents who can program, understand processes, operate, and maintain machining centers.

A small machining center is the starting point for Flexible Manufacturing Systems (FMS) and digital factories. Mastering it allows you to better interface with advanced technologies such as industrial robots and automated logistics systems.

Learning about small machining centers is far more than just mastering a single device; it is a "high-value skill" that equips you with core competitiveness in the era of intelligent manufacturing.

When selecting one, you can focus on the following aspects to clarify your core requirements:

For teaching and personal use, an accuracy of ±0.01mm is usually sufficient.

Machining Materials: For primarily processing aluminum, copper, and plastic, you can choose models with higher spindle speeds (e.g., 5000-24000 rpm). If you need to process steel or stainless steel, you should pay attention to the main motor power (recommended 2.2KW or above) and the overall rigidity of the machine tool.

Working Environment: Be sure to confirm whether the power supply is 220V household or 380V industrial electricity. Also, consider the equipment's footprint dimensions and weight.

XENDOLL VMC300-3 small bench top cnc machining center

Technical Parameters:

Positioning Accuracy: ±0.015mm

Repeat Positioning Accuracy: ±0.01mm

Work Table: 550×160mm

X-Axis Travel: 300mm

Y-Axis Travel: 175mm

Z-Axis Travel: 270mm

Spindle Speed: 24,000 rpm

Spindle Motor Power: 1.5KW

Rapid Traverse Rate: 10,000 mm/min

Tool Magazine Capacity: 12-station umbrella-type tool magazine

Power Supply: AC220V / 50Hz

Net Weight / Gross Weight: 670 kg / 710 kg

Machine Dimensions: 1395×1256×1913mm

It uses 220-volt power, has a small footprint and low power consumption. It combines transparent acrylic and sheet metal for enclosure, enhancing observation safety while ensuring structural stability. It is fully enclosed and features a 12-station umbrella-type tool magazine operated with 0.6 Mpa air pressure.

It offers enhanced functionality with three-axis linkage and is equipped with an industrial-grade CNC system compatible with internationally common programs. It includes functions such as fault auto-detection and alarm, and power-off memory.

The spindle is a high-precision industrial-grade spindle with an ISO20 taper. The spindle speed ranges from 300 to 24,000 rpm.

Deepen your expertise by learning a mainstream CAD/CAM software (such as UG/NX, Mastercam, PowerMill, etc.), which is key to achieving automated programming. Simultaneously, study knowledge on materials, cutting tools, and machining processes. Strive for hands-on operation of actual equipment, managing the complete workflow from workpiece setup and tool measurement to program transfer and finished machining, and learn basic accuracy inspection and equipment maintenance.

Welcome to our video link:

YouTube: Xendoll

Facebook: Xendoll

WEB：www.xendolltools.com